Sars' History

本頁是唯讀的，您可以看到原始碼，但不能更動它。您如果覺得它不應被鎖上，請詢問管理員。
====== Apache2 + SSL ======
http://billcho.twbbs.org/~bill/wordpress/?p=38

==== 安裝套件 ====
  # apt-get install apache2
  # apt-get install openssl ssl-cert
  # apt-get install libapache2-mod-php5 php5-cli php5-common php5-cgi php5

==== 產生 certificate file ====
  # openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/apache.pem -keyout /etc/apache2/apache.pem
  # chmod 600 /etc/apache2/apache.pem


==== 開啟port ====
確認 /etc/apache2/ports.conf 內容如下：
<code>
Listen 80

<IfModule mod_ssl.c>
    Listen 443
</IfModule>
</code>

==== 修改 /etc/apache2/sites-available/default ====
加入列幾行(實際上此例是直接複製本 port 80的部份, 差只在於將port改成443)
<code>
NameVirtualHost *:443

<VirtualHost *:443>
ServerAdmin webmaster@localhost

SSLEngine on
SSLCertificateFile /etc/apache2/apache.pem

DocumentRoot /var/www/
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
# This directive allows us to have apache2’s default start page
# in /apache2-default/, but still have / go to the right place
#RedirectMatch ^/$ /apache2-default/
</Directory>

ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
<Directory “/usr/lib/cgi-bin”>
AllowOverride None
Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
Order allow,deny
Allow from all
</Directory>

ErrorLog /var/log/apache2/error.log

# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn

CustomLog /var/log/apache2/access.log combined
ServerSignature On

Alias /doc/ “/usr/share/doc/”
<Directory “/usr/share/doc/”>
Options Indexes MultiViews FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
Allow from 127.0.0.0/255.0.0.0 ::1/128
</Directory>
</VirtualHost>

</code>

==== 設定 https 的目錄路徑 ====
設定 http.conf
<code>

<Directory /var/www/test/subdir>
# Inside the subarea any Intranet access is allowed
# but from the Internet only HTTPS + Strong-Cipher + Password
# or the alternative HTTPS + Strong-Cipher + Client-Certificate

# If HTTPS is used, make sure a strong cipher is used.
# Additionally allow client certs as alternative to basic auth.
SSLVerifyClient optional
SSLVerifyDepth 1
SSLOptions +FakeBasicAuth +StrictRequire
SSLRequire %{SSL_CIPHER_USEKEYSIZE} >= 128

# Force clients from the Internet to use HTTPS
RewriteEngine on
RewriteCond %{REMOTE_ADDR} !^192\.168\.1\.[0-9]+$
RewriteCond %{HTTPS} !=on
RewriteRule .* - [F]

# Allow Network Access and/or Basic Auth
#Satisfy any

# Network Access Control
Order allow,deny
Allow from all
#Allow from 192.168.1.0/24

# HTTP Basic Authentication
</Directory>

</code>

==== enable ssl & rewrite.load modules ====
(建立softlink，mods-enabled -> mods-available)
  # a2enmod ssl 
需要啟動apache2


====== 使用Apache自動判別語系 ======
http://casper.tiger2.net/blog/2006/04/23/apache/


httpd.conf內容如下:

  DirectoryIndex index.html index.html.var index.php index.php3 index.php4
  AddHandler type-map var

index.html.var內容如下:

  URI: index.en.html
  Content-language: en
  Content-type: text/html

  URI: index.zh-tw.html
  Content-language: tw, zh-tw
  Content-type: text/html

  URI: index.zh-cn.html
  Content-language: cn, zh-cn
  Content-type: text/html

這樣一來, 當browser連線上來時, Apache便會去判別browser的預設語言. 若是英語, 則轉到index.en.html, 若是zh-tw, 則轉到index.zh-tw.html

不過有個問題, 如果browser的語言不在上面, 在Apache 2.0測試的結果是會抓第一個, 而Apache 2.2測試會出現錯誤訊息, 說找不到語言檔.

2006/06/03 Update:
今天才注意到, 是因為 Apache 2.2 的 language 設定檔放到 conf/extra/httpd-languages.conf, 然後我忘了把httpd.conf裡面的include打開了. 而當browser設定的語言都找不到時, Apache 會根據LanguagePriority (在httpd-languages.conf)的順序顯示. (其實這地方似乎只有第一個會用到吧? 什麼情況下會用到後面的語言呢?)

又, 看了一下Apache的manual目錄, 才注意到有另外的方法可以設定, 有興趣的可以參考conf/extra/httpd-manual.conf和manual下面的任何一個.html檔案. 下次再找機會研究一下, 看有什麼不同.
Sars' History

使用者工具

網站工具

頁面工具
